Colloidal minerals

We offer minerals and trace elements in colloidal form because of their high bioavailability. More and more people are buying our colloidal minerals to benefit from their purity, small particle size and high concentrations.

The variety of colloidal minerals means that everyone can benefit from them - for all kinds of health problems. Our customers report great successes - sometimes unbelievable! NEW: With most colloidal minerals you can choose different sizes.

In addition to colloidal minerals, we also offer colloidal oils and monatomic elements. Request our 100-page ebook on colloidal minerals by email.

Colloidal boron

From 38.50 €

Colloidal calcium

From 38.50 €

Colloidal carbon

From 44.35 €

Colloidal chromium

From 38.50 €

Colloidal germanium

From 40.45 €

Colloidal gold

From 40.45 €

Colloidal magnesium

From 38.50 €

Colloidal manganese

From 38.50 €

Colloidal platinum

From 38.89 €

Colloidal silicon

From 38.50 €

Colloidal silver

From 23.30 €

Colloidal sodium

From 38.50 €

Colloidal sulphur

From 38.50 €

Colloidal tantalum

From 38.50 €

Colloidal zinc

From 38.50 €

Ozonated olive oil

From 19.40 €

Why take colloidal minerals?

Minerals and trace elements best in colloidal form

All fluids in the body like blood or lymph are colloid fluids. Every human being has all the elements in him or herself, as colloid fluids. In their colloidal solution, minerals and trace elements are perfectly available for our body - because it consists of colloidal fluids.

By the following measures one can determine which minerals or trace elements are missing:

  •   Blood test
  •   Bioenergetic tests (EAV, RAC, ...)
  •   Hair analysis
  •   Computer-aided diagnostics such as Oberon, BioScan, etc.

In addition, you can read our ebook on colloidal minerals to find out which colloidal minerals suit you best. There are also detailed application recommendations. Please order this free ebook by email.

Compounds of an element with other substances such as salts, e.g. silver salts or germanium citrate lactate, are not colloid fluids. They have to be broken down by the metabolism. Colloidal fluids, on the other hand, can be absorbed independently of the metabolism - via the mucous membranes.

What is the difference between minerals and trace elements?

Minerals are divided into quantitative elements and trace elements. Quantitative elements are all inorganic substances whose concentration in the body is more than 50 mg/kg: Sodium, potassium, magnesium, calcium, phosphorus and sulphur.

Trace elements are those substances which are present in the body in lower concentrations: e.g. chromium, copper, silicon, zinc, manganese, etc. The exception is iron: although it is present at about 60 mg/kg, it is one of the trace elements.

Which colloidal solutions are there?

In our environment there are e.g. the following colloidal forms:

  •   clouds, fog
  •   smoke
  •   spray
  •   colors
  •   toothpaste
  •   icecream
  •   polystyrene

Therapeutic use

Colloidal silver has had a true triumph. As a result, the interest for other colloidal minerals grows increasingly, e.g. Colloidal gold, silicon or germanium. Here is an overview of all 28 colloidal minerals. 

Aluminium Germanium Lithium Platinum Vanadium
Bismuth Gold Magnesium Sulphur Tin
Boron Potassium Manganese Selenium Zinc
Calcium Cobalt Molybdenum Silver Fullerenes
Chromium Carbon Sodium Silicon  
Iron Copper Nickel Tantalum  

There are two ways to find out which colloidal minerals you need:

  •   You can read our ebook on Colloidal minerals - which you can request from us free of charge by email
  •   You use the Test kit Colloidal minerals

Children of the stars

The heavier elements of our body such as gold and silver did not originate on earth. They must have originated outside our solar system, because our sun is not hot enough to "burn" elements that are heavier than iron. These heavier elements come from exploded supernovae or the collision of neutron stars. A collision of this kind, first measured at the end of 2015, produced about a mass of gold and a mass of platinum.

These elements came to earth through meteorite impacts. It is fascinating that the frequency of the heavier elements in our body corresponds more or less to their frequency in the earth's crust. Our body needs these elements - and they are most effective in a colloidal form.

In the periodic table of the elements you can see which elements are meant: all with atomic numbers greater than 26.

The heavier elements are e.g. necessary for the formation of DNA and protein molecules. Without them there would be neither us nor the animals. So it is fair to say that we are children of the stars.

What's new about our colloid fluids?

You see a corrugated metallic surface

Our colloids are produced using a completely new method, namely vibration. This electro-physical process is called proton resonance. The corresponding material is stretched and finally brought to decay.

In proton resonance, the starting material is strongly stimulated by its natural oscillation and then split off by an electrophysical process to the desired particle size and charge.

Thanks to this new manufacturing process, these colloid fluids are way ahead of the solutions traditionally produced by electrolysis. In addition, only a few elements can be colloidally dissolved with electrolysis - only a few are suitable for this purpose. Try electrolysis with sulphur, calcium or carbon, for example. That is not possible!

Example goldwater: For the production of goldwater with a generator one would need 1000 times stronger current than with silver generators, in order to receive concentrations in effective ppm concentrations. This would require a room-filling generator with life-threatening strong currents. Commercial silver generators could only produce very weak gold concentrations in the ppb range (ppb = parts per billion)

The reason: Gold ions are 1000 times more difficult to remove from the metal matrix than silver ions. These are electrophysical laws. In addition, pure gold electrodes would be very expensive (several hundred € per pair).

Our colloidal minerals - produced with proton resonance - are characterized by

  •   extremely fine particles
  •   highest purity
  •   high concentration

Extremely fine solution

You see a molecule of 9 atoms, each with orbiting electrons

The proton resonance makes the particles extremely small - only a maximum of 10-30 atoms in size (depending on the element). And the physical law applies: the smaller the particles, the larger is the inner surface. This means more efficiency for you at the same ppm concentration!

Just imagine: In a bucket full of large stones, their contact areas sum up to about one DIN A3 sheet (or 11.7 x 16.5 inches). The same bucket filled with fine sand has interfaces the size of a football pitch! The inner surface is therefore much larger, and that with approximately the same mass (weight). The thousands and thousands of grains of sand have much more extensive interfaces than the few stones.

The same is true of the elements made of the same atoms: the smaller the particle size, the more extensive are the contact surfaces - and thus the effective surface. It is therefore understandable that particle size plays an important role in the choice of colloidal minerals.

Highest purity

You receive our colloids in a purity never achieved before - 99,9999% ("Sixfold nine"). This is important to prevent the colloid particles from combining with salts and thus becoming useless. Example silver water: in an impure dispersion silver ions can combine to silver nitrate.

Our colloids are produced with double distilled water and thus contain almost nothing except pure water and the respective element.

Strong concentrations

Our colloidal solutions are highly concentrated: From 44 ppm, many over 60 ppm.

The abbreviation ppm means "parts per million". It is used in medicine and chemistry to indicate the concentration of a substance in a dispersion medium. Ppb means "parts per billion".

The following table shows the orders of magnitude:

Conc.This much mg is in 1 liter
50 ppb 0,05 mg
50 ppm 50 mg
50% 500.000 mg

A colloid fluis with 50 ppm contains 50 mg of the substance in one liter. 

When buying colloidal minerals, be careful: you will need twice as much of a 50ppm colloid than of a 100ppm colloid in order to absorb the same amount of the substance. The size of the particles is also a parameter.

There are two methods to measure ppm: the first is the atomic absorption spectral analysis, which can be ordered in the laboratory for approx. 70,- €. The second is the measurement with a laboratory precision balance before and after production of the colloid: this way you can see exactly how much material has gone into the dispersers.

That's how it's been so far

You see a woman holding a colloidal silver generator on a glass of water

Until now, colloid solutions have been produced by electrolysis. Through two electrodes, which consist of the element to be produced, an electrical direct current was fed into a conductive liquid. Distilled water is best suited for this purpose (the conductivity is achieved by heating).

It is therefore very easy to produce e.g. silver water yourself. During this process silver particles and silver ions are produced. You can find out more about this on the page Colloidal silver generator

What is a colloid?

Colloidal solutions contain a certain chemical element in its purest form. This is dissolved in extremely small particles. Colloid fluids thus consist of tiny particles of minerals or trace elements. These are distributed in aqua destillata - also known as dispersions.

A colloid fluid contains both electrically neutral particles and electrically charged ions. Due to their negative charge, the ions are even more effective than the electrically neutral particles.

It is well known that negative ions are good for humans - in whatever form: in water, air, food, etc. - but they are also good for the environment. At this point we refer to the Wikipedia article.

We speak of a colloidal fluid when three conditions are met:

  •   different components must be present (e.g. silicon/water as dispersion medium) 
  •   these must have different aggregate states (solid / liquid)
  •   The solid particles must not be soluble, i.e. they must not form chemical compounds with the carrier substance (dispersions)

Effects

Each of our 27 colloids has its specific effects and properties. They are described in detail in the brochure about colloids, that we can send you for free as a pdf file.

By the way, a colloidal solution has completely different effects than a corresponding homeopathic remedy. The colloidal copper, for example, acts mainly on blood, blood vessels, nerve cells and connective tissue. Homeopathic Cuprum metallicum, on the other hand, is used for cramps, nausea or vomiting.

Colloidal fluids are not drugs and therefore need no prescription. There are no side effects to be feared, since colloidal fluids are also found in the organism. So you do not take anything exogenous.

Are there examples in the environment?

Examples for colloidal states are clouds in the sky, fog or smoke, but also blood or lymphatic fluid. Because the body fluids are colloidal fluids, the body can absorb minerals and trace elements in a colloidal form without great using much energy.

Simple optical proof

A conical beam of light shines through a glass filled with water

By the way, there is a simple procedure for testing a colloidal fluid: If a fine light beam is sent through a colloidal liquid in a dark room, the light beam is clearly visible and forms a cone, i.e. it becomes wider ("Tyndall effect"). Use a flashlight to shine through a 2mm hole in a cardboard box next to the glass - and you'll see it! 

Use of our colloidal minerals

Dosage

Due to the small size of the particles, the purity and the high ppm values, the dosage can be kept very low. The manufacturer recommends the following dosage:

  •   8 drops a day for Colloidal selenium
  •  15 drops a day for the following colloidal minerals: bismuth, cobalt, copper, iron, lithium, molybdenum, nickel, potassium, selenium, tin
  •  30 drops a day for the following colloidal minerals: boron, calcium, carbon (glyko), chromium, fullerenes, gold, magnesium, manganese, platinum, silicon, sodium, sulphur, tantalum, vanadium, zinc
  •   twice a day 15 drops: all colloidal oils, ozonated olive oil
  •   up to 4-5 time a day 15 drops: Colloidal silver und germanium
  •   4 times a day 5 drops: all monoatomic elements

It is best to use the pipette included for exact dosing. The pipette has a capacity of 3 ml. 1 ml corresponds to approx. 30 drops.

During the application, you can imagine where the remedy should go in your body. Thus you include your mental powers.

Oral

Place the recommended amount of each colloidal mineral/colloidal oil/monoatomic element on a small plastic spoon and put it then in the mouth under your tongue. There, it will be absorbed through the mucous membranes. Leave it there for 1 minute and swallow the rest. Then you should drink a glass of still water. 

If you take several colloidal minerals at the same time, please leave a space of 15 minutes between each intake. Please also keep a distance of at least 15 minutes between intake and consuming stimulants such as coffee, alcohol or vinegar.

In principle, you can take all colloidal minerals in the morning - but there are some advantages if you pay attention to the following: iron at noon, magnesium, silver and potassium in the evening.

Vaporizer

Using a vaporizer is a very efficient form of intake. Such inhalation devices are now even available from discounters, and they are available in a large selection.

In a vaporizer, the colloidal fluids are atomized into tiny droplets and absorbed by the entire mucous membrane of the mouth and throat.

Rubbing

In addition, you can do a rub: Apply approx. 15 drops twice a day to the palms of your hands and rub upwards over the inside of the forearms into the crook of your arm. With silver water you can do this 4-5 times a day. To prevent bacterial contamination, avoid skin contact with the pipette. 

Local use

You can also use the colloids externally - in the areas where they are supposed to work. A classic case is colloidal silver on wounds, bedsores or athlete's foot. Silver is also very helpful when applied directly into the nose.

Eyes

Colloidal minerals can also be trickled directly into the eye, e.g. germanium, gold and silver. This local application can be done in addition to oral administration.

You see a blue bottle

Shelf life

Our products stay fresh for a long period of time, at least one year. This is thanks to the blue glass bottles in which they are filled. Blue glass almost completely prevents light from entering the contents of the bottle. 

The exception is Colloidal silver: This can only be stored for 3 months. We label the coll. in our warehouse with date stamp. So we make sure not to sell anything that approaches the expiration date. So you always get a fresh and effective colloid.

There are two energies that affect shelf life: Heat and light. So keep the colloidal fluids as dark and cool as possible.

Please keep the product away from radiating devices, such as mobile phones, loudspeakers, electrical appliances, lighting or the stove. Please do not store the colloid in the refrigerator - the electrical radiation would impair the quality.

Related topics

Monatomic elements can be obtained from colloidal minerals through an innovative electro-physical process.

We also offer colloidal oils. Especially your skin can benefit from the health effects of colloidal fluids.

 Pretty woman with questioning, critical face

Frequently Asked Questions

Can different colloidal minerals be mixed together?

No, the individual solutions should not be mixed, but taken separately. And you should wait 15 minutes between each intake.

How long should the colloidal products be taken?

There is no general answer to this question. For example, one person has a greater iron deficiency than the other. In addition, not everyone has the same need for iron. So it depends on many factors.

You can determine the lack of minerals or trace elements

  •   by blood analysis in the laboratory
  •   with a technical diagnostic system like e.g. BioScan
  •   by other bioenergetic tests such as Biotensor

Ultimately, you can also listen to your own body: when do I feel better?

Is it possible to take several doses a day when I have low levels of an element?  

Yes, it is also a matter of re-filling the blood level, e.g. in the case of iron or zinc deficiency.

Is it possible to overdose colloidal minerals? 

No. See the answer to the next question.

Are colloidal minerals suitable for long-term use??

Yes, metabolism means "wear and tear", which also applies to colloidal minerals. That is why you can always take the minerals and trace elements that your body needs.

The exception is silver: Continuous intake can cause argyria, a gray coloration of the skin. Especially if you take silver in the form of silver nitrate.

How do I protect my colloidal mineral against electrosmog?

You can wrap the bottle in aluminium foil to protect it. There are also inexpensive metal coffee cans in 1€ shops. These are perfect for shielding the colloid bottles in a Faraday cage.

How can I accurately dose the drops?

You will receive a pipette with every bottle of colloidal mineral. This allows you to take the liquid exactly to the droplet.

For 200 ml bottles, 30 drops per day are recommended. For 100 ml bottles 15 drops and for 50ml bottles 8 drops.

How long will one bottle last if I take the colloidal minerals daily, according to the recommendations?

30 drops from the pipette supplied by us are approx. 2 ml. This means that the 200 ml bottle is sufficient for about 100 doses. The same applies to the smaller bottles, because only 15 drops per day are recommended for 100 ml bottles, etc..

Why do your colloidal minerals have different concentrations (ppm)?

This is due to the technical limitations of their production.

Aren't colloidal aluminium, platinum or vanadium harmful heavy metals?

These metals are not toxic as colloids. They can also be taken orally without hesitation.

Small particles float in my colloidal iron. Is that normal?

Yes, it is normal. These are small iron particles. 

You can still use the iron safely. If there is an uncertainty: take with a vaporizer, then the particles are filtered out.

What is colloid chemistry?

Colloid chemistry is a branch of chemistry that deals with dispersions and disperse states. 

Colloid chemistry classifies colloidal solutions between real solutions and suspensions: they show

  •   no osmotic pressure
  •   no boiling point increase
  •   and no freezing point humiliation

In chemistry, the term dispersion generally refers to a heterogeneous mixture of at least two substances. In colloid chemistry, dispersion means the fine distribution of solids in a liquid dispersion medium. In practice, this is usually Aqua destillata.